Products
Surface Equipment
There are two different ways to produce logs at surface which
basically depend on the means the downhole equipment is run in
hole, these could be run either on wireline or slickline (using battery
packs to provide power to the tools).
The STP panel is used to power up downhole tools and acquires
realtime data at surface, from all the downhole sensors connected to
an electrical cable.
In case of using a slickline wire a different panel called DTR is used
at surface which records the measured depth and time (among
others, like line tension and cable speed) that will be used to
synchronize the data recorded downhole to finally produce logs
similar to those created with an SRO logging system.
There are two different ways to produce logs at surface which
basically depend on the means the downhole equipment is run in
hole, these could be run either on wireline or slickline (using battery
packs to provide power to the tools).
The STP panel is used to power up downhole tools and acquires
realtime data at surface, from all the downhole sensors connected to
an electrical cable.
In case of using a slickline wire a different panel called DTR is used
at surface which records the measured depth and time (among
others, like line tension and cable speed) that will be used to
synchronize the data recorded downhole to finally produce logs
similar to those created with an SRO logging system.
Production Logging
Our production platform consist of several compact modules that can
be combined in any order to configure the best production string that
satisfy your requirements.
Each of these modules is connected independently to a very robust
downhole bus together with a telemetry cartridge which transfers all
the sensors readings to the STP (a memory cartridge can be used
instead in case of slickline logging) 15 times per second to produce
realtime logs. Even if one of this modules fails the string will
automatically turn it off and continue transmitting the readings from
all the other modules as if the defective one was not attached.
List of available production modules:
Our production platform consist of several compact modules that can
be combined in any order to configure the best production string that
satisfy your requirements.
Each of these modules is connected independently to a very robust
downhole bus together with a telemetry cartridge which transfers all
the sensors readings to the STP (a memory cartridge can be used
instead in case of slickline logging) 15 times per second to produce
realtime logs. Even if one of this modules fails the string will
automatically turn it off and continue transmitting the readings from
all the other modules as if the defective one was not attached.
List of available production modules:
Memory Gauges
Small length and diameter together with long duration battery life are
common features of our state of the art memory gauges. They can
be run on slickline and left in the well with an anchor hanger or in
pockets in the production string. We also provide specially designed
gauges that fit in the gas lift mandrels as if it was a dummy valve.
Small length and diameter together with long duration battery life are
common features of our state of the art memory gauges. They can
be run on slickline and left in the well with an anchor hanger or in
pockets in the production string. We also provide specially designed
gauges that fit in the gas lift mandrels as if it was a dummy valve.
 |
 |
 |
 |
 |
| Downhole Logging Systems & Measurement Equipment |
MWD Memory Gauges
We manufacture a ruggedized version of the above gauges to be
used in annular and direct pressure recording while drilling.
The system consists of a modified landing sub, fixing piston and a
1.25" pressure temperature gauge. Please click on the next link to
get a brochure showing this layout.
We manufacture a ruggedized version of the above gauges to be
used in annular and direct pressure recording while drilling.
The system consists of a modified landing sub, fixing piston and a
1.25" pressure temperature gauge. Please click on the next link to
get a brochure showing this layout.
Downhole Data Latch
Now you can read the recorded data from a memory gauge while it is
still in the well by using our inductive contact less data latch system.
You can download the data and continue in either memory or SRO
mode after you have latched on the top of the gauge.
This system is compatible with any of our downhole gauges
Now you can read the recorded data from a memory gauge while it is
still in the well by using our inductive contact less data latch system.
You can download the data and continue in either memory or SRO
mode after you have latched on the top of the gauge.
This system is compatible with any of our downhole gauges
